First Skills Kit

The T-positioning blocks and code names of bolts

Discover through building and various experiments how important and strong the small T-positioning blocks are. And why do bolts have sort of secret code names like M6x30?

Clamping an axle and mounting wheels

Discover how you can use the axle clamp to clamp the axle of your Intento creation and how you can attach the wheels to the axle. And what is the difference between a driven and a free spinning wheel?

A new way of steering

We added the stabilization part for a new way of steering!

Discover the functions and requirements of the Stabilizer by building different experiments. Learn this different way of steering.

Installing an axle clamp, axle and wheel

In this Basic Skill you will discover about the axle clamp, the axle and the wheel. These three parts can be found in almost every Infento Ride with wheels.

Assembling and mounting a seat or standing board

Find out how to use the 3 different boards on a Ride, giving you a surface to sit, stand or lean your knees on.

Assembling the swivel wheel

You can use a swivel wheel to steer in all directions (like a shopping cart), but it can also be used to move you forward, for example with the Flowmotion, or even to drift with.

Mounting two profiles with a T-joint

Get started with the T-connector and learn how to attach two profiles at right angles to each other.

The Infento connectors

In this Basic Skill we go over the necessities for attaching each coupler. In addition, we look at some handy tricks to make building easier.

The L-joint and the must-have profile nuts

Discover how to make 90 degree corners with L-joints and profile nuts.

And how do you correctly place a profile nut in a profile?

The versatility of multi angle joints

Adjust and fix the angle using the multi angle joint.

Discover through building and various experiments how important and versatile the multi angle joints are. Learn how degrees work and how to use them in the Infento system.

L-joint blocks

The right-angled L-joint blocks and the straight positioning blocks.

Connecting two coupling pieces

Discover how you can connect joints together and thus create even more different constructions!

Hinge formed by bearing and U-block

Discover how you can make a hinge with a bearing block and U-block that can be used, for example, to make a steering wheel.

Mounting the wheels

Discover how you can use the axle clamp to clamp the axle of your Infento creation and how you can attach the wheels to the axle. And what is the difference between a driven and a free spinning wheel?

Mounting the handlebars

Tighten handlebars properly by using profile nuts and adjusting bolts.

Discover through building and various experiments how to correctly mount a handlebar. And how does a profile nut work again?

How to make a wheel roll

Discover the correct way of mounting a wheel on an axle by building different experiments. And what are all those small parts for?